Duration: 2 days training and 1 day assessment
Times: 7:00am – 3:00pm
Class size: 8 students
Pre-requisite: No pre-requisites
Assessment type: Theory and practical
Units of Competency
|Course Code||Course Name|
|TLILIC3019||Licence to operate a reach stacker (greater than 3 tonnes capacity)|
What is a Reach Stacker?
To operate a reach stacker you need to have an RS high risk work licence (HRW).
The reach stacker licence covers powered reach stackers (with a capacity of three tonnes or more) that have an attachment for lifting, lowering, moving and travelling with a shipping container.
In Queensland, until 31 December 2016, a person who holds a non-slewing mobile crane licence (CN) is also permitted to operate a reach stacker without holding an RS licence. From 1 January 2017, the RS HRW licence class must be held for the operation of a reach stacker.
Note: this licence cannot be used to operate a portainer crane.
This unit specifies the skills and knowledge required to operate a reach stacker safely.
Reach stacker means a powered reach stacker that incorporates an attachment for lifting and lowering a shipping container.
This unit applies to the activities of a person operating a reach stacker greater than 3 tonnes capacity that incorporates an attachment for lifting, moving and travelling with a shipping container (not including a portainer crane).
A person performing this work is required to hold a reach stacker high risk work (HRW) licence.
This unit requires a person operating a reach stacker to plan work, conduct routine checks, prepare reach stacker operations, operate reach stacker, travel reach stacker and mobile container, and shut down and secure reach stacker.
Why Train with Us?
- Large variety of funding options available:
- CSQ Short Course
- BERT Training Fund
- We do not cancel courses due to low numbers*
- We include RII units
- Extensive range of plant equipment
- Tax deduction for accredited training
*Except where required by the state safe work regulator
- WH&S legislation
- Risk and Hazards
- General inspections and preparation of work site requirements
- Plan and prepare work
- Conduct routine checks and equipment maintenance
- Prepare reach stacker operations
- Operate reach stacker
- Travel reach stacker and mobile container
- Shut down and secure reach stacker
Course Training & Outcomes
Training & Mandatory Assessments
With successful completion of the training and mandatory assessment applicants will be issued with an assessment summary (AS1) and Statement of Attainment (SOA) for the Unit of Competency:
TLILIC3019 Licence to operate a reach stacker (greater than 3 tonnes capacity)
Successful applicants will receive an assessment summary (AS1) from the accredited assessor and a Statement of Attainment from WH&S More Skills. Applicants need to complete the online application for a new Queensland HRW Licence on the Worksafe QLD website. This must be done within 60 days of successfully completing the practical assessment. The application fee is $91.50 and payable at the time of your application.
Students should retain their AS1 and proof of payment as evidence that they can lawfully perform work in the relevant class of High Risk, pending a decision on your application. Upon lodgement, enquiries regarding your application should be directed to Workplace Health and Safety QLD on phone 1300 369 915.
Training Requirements & What To Bring
- High Risk Work Licence assessments can only be undertaken at the age of 18 years or over
- All current High Risk Work Licences
- Logbooks recording high risk work hours under supervision (if available)
- Unique Student Identifier (USI) is required prior to course commencement – please bring number to course.
- Photo ID i.e. Queensland or Interstate Driver’s Licence or Passport
- Applicants will be required to have a basic knowledge and understanding of the English language
- PPE must be worn by students attending the course on all occasions. This includes steel cap boots, long pants, long sleeves, (high vis shirt if possible otherwise long sleeves with a high vis vest) and a safety hard hat. For dogging, rigging & scaffolding courses, students are required to bring gloves and safety glasses.
WH&S More Skills will provide whistles as well as the general training equipment, notes, logbook and training plans, calculators and pens.
The training facilities are comfortable air conditioned with modern training aids. Tea and coffee making facilities are provided as well as fridges and a microwave for participants to use. There are several takeaway lunch spots of good quality within a kilometre. Lunch is not provided with the training.
Students have direct access to all the necessary plant required for the relevant course i.e. Cranes, EWP, Forklifts and Scaffold.
The Construction Training Centre offers a free car park for all students and visitors, as well as a cafe onsite.
On-site Training & Group Bookings
We also offer onsite training as well as group booking options at our training facilities.
Onsite training and group bookings provide the advantage of being able to choose the course dates as it is suitable for you and your employees.
For more information contact us on (07) 3183 0000 or send an email enquiry.