Duration: 2 days training and 1 day assessment
Times: 7:00am – 3:00pm
Class size: 8 students
Pre-requisite: No pre-requisites
Assessment type: Theory and practical
Forklift Licence is also conducted as a Night Course. Please contact us for further information.
Units of Competency
|Course Code||Course Name|
|TLILIC2001||Licence to operate a forklift truck|
|RIIHAN201D||Operate a forklift|
What is a Forklift Truck?
The LF high risk work licence class allows you to use forklift trucks, but does not include order-picking forklift trucks (see below).
A forklift truck is a powered industrial truck equipped with a mast and an elevating load carriage which has a pair of fork arms attached (that can be raised 900 mm or more above the ground) or other load holding attachment.
This unit specifies the skills and knowledge required to operate a forklift truck safely.
Forklift truck means a powered industrial truck equipped with lifting media made up of a mast and an elevating load carriage to which is attached a pair of fork arms or other arms that can be raised 900 mm or more above the ground, but does not include a pedestrian-operated truck or a pallet truck.
A person performing this work is required to hold a forklift truck high risk work (HRW) licence.
This unit requires a person operating a forklift truck to plan the work, conduct routine checks on a forklift truck, shift loads in a safe manner, and safely shut down and secure equipment after completing operations.
Why Train with Us?
- Large variety of funding options available:
- CSQ Short Course
- BERT Training Fund
- We do not cancel courses due to low numbers*
- We include RII units
- Extensive range of plant equipment
- Tax deduction for accredited training
*Except where required by the state safe work regulator
- WH&S legislation
- Risk and Hazards
- General inspections and preparation of work site requirements
- Plan and prepare work
- Conduct routine checks and equipment maintenance
- Operate forklift truck
- Shift loads
- Shut down and secure forklift truck
Course Training & Outcomes
With successful completion of the training applicants will be issued with a Statement of Attainment (SOA) for:
RIIHAN201D Operate a forklift
With successful completion of the mandatory assessment applicants will be issued with an assessment summary (AS1) and Statement of Attainment (SOA) for the Unit of Competency:
TLILIC2001 Licence to operate a forklift truck
Successful applicants will receive an assessment summary (AS1) from the accredited assessor and a Statement of Attainment from WH&S More Skills. Applicants need to complete the online application for a new Queensland HRW Licence on the Worksafe QLD website. This must be done within 60 days of successfully completing the practical assessment. The application fee is $91.50 and payable at the time of your application.
Students should retain their AS1 and proof of payment as evidence that they can lawfully perform work in the relevant class of High Risk, pending a decision on your application. Upon lodgement, enquiries regarding your application should be directed to Workplace Health and Safety QLD on phone 1300 369 915.
Training Requirements & What To Bring
- High Risk Work Licence assessments can only be undertaken at the age of 18 years or over
- All current High Risk Work Licences
- Logbooks recording high risk work hours under supervision (if available)
- Unique Student Identifier (USI) is required prior to course commencement – please bring number to course.
- Photo ID i.e. Queensland or Interstate Driver’s Licence or Passport
- Applicants will be required to have a basic knowledge and understanding of the English language
- PPE must be worn by students attending the course on all occasions. This includes steel cap boots, long pants, long sleeves, (high vis shirt if possible otherwise long sleeves with a high vis vest) and a safety hard hat. For dogging, rigging & scaffolding courses, students are required to bring gloves and safety glasses.
WH&S More Skills will provide whistles as well as the general training equipment, notes, logbook and training plans, calculators and pens.
The training facilities are comfortable air conditioned with modern training aids. Tea and coffee making facilities are provided as well as fridges and a microwave for participants to use. There are several takeaway lunch spots of good quality within a kilometre. Lunch is not provided with the training.
Students have direct access to all the necessary plant required for the relevant course i.e. Cranes, EWP, Forklifts and Scaffold.
The Construction Training Centre offers a free car park for all students and visitors, as well as a cafe onsite.
On-site Training & Group Bookings
We also offer onsite training as well as group booking options at our training facilities.
Onsite training and group bookings provide the advantage of being able to choose the course dates as it is suitable for you and your employees.
For more information contact us on (07) 3183 0000 or send an email enquiry.