Duration: 2 days training and 1 day assessment
Times: 7:00am – 3:00pm
Class size: 8 students
Pre-requisite: No pre-requisites
Assessment type: Theory and practical
For greater flexibility, our EWP >11m Licence course is also conducted as a Night Course. Please contact us for further information.
Units of Competency
|Course Code||Course Name|
|TLILIC2005||Licence to operate a boom-type elevating work platform (boom length 11 metres or more)|
|RIIHAN301D||Operate elevating work platform|
|TLID3035||Operate a boom type elevating work platform|
What is an EWP (Elevating Work Platform)?
An elevating work platform uses a telescoping device, hinged device, articulated device or any combination of these to raise personnel, equipment or materials to perform work. To operate a boom-type elevating work platform with a boom length of 11m or more, you need a High Risk Work Licence class "WP".
The length of the boom is the greater of either the:
- vertical distance from the surface supporting the boom-type elevating work platform to the floor of the platform with the platform extended to its maximum height
- horizontal distance from the centre point of the boom's rotation to the outer edge of the platform with the platform extended to its maximum distance.
Note: boom-type elevating work platforms less than 11 metres in length are not included in this definition.
There are many different types of elevating work platforms such as:
- trailer mounted EWP's
- scissor lifts
- telescoping boom-type EWP's
- telescoping knuckle boom-type EWP's
- vehicle mounted EWP's
- telehandler with EWP attached
This course covers the skills and knowledge required to safely operate a boom-type elevating work platform where the length of the boom is 11 metres or more, scissor lifts and boom-type elevating work platforms where the length of the boom is less than 11 metres. It requires a person operating an elevating work platform to:
- plan the work
- conduct routine checks
- set up
- shut down and secure a variety of elevating work platforms.
A person performing work operating a boom-type EWP, where the boom length is 11 metres or more, is required to hold a boom-type elevating work platform high risk work (HRW) licence class "WP".
Boom-type elevating work platform means a telescoping device, hinged device, or articulated device, or any combination of these, used to support a platform on which personnel, equipment and materials may be elevated.
Why Train with Us?
Large variety of funding options available:
- CSQ Short Course
- BERT Training Fund
- We do not cancel courses due to low numbers*
- We include RII units
- Extensive range of plant equipment
- Tax deduction for accredited training
*Except where required by the state safe work regulator
- Risks and Hazards
- General inspection and preparation of work site requirements
- Plan and prepare work
- Conduct routine checks and equipment maintenance
- Set up elevating work platform
- Operate elevating work platform
- Shut down and secure equipment
- WH&S legislation
HRW licence requirements
Training & Mandatory Assessment (HRW licence requirements)
With successful completion of the training and mandatory assessment, applicants will be issued with an Assessment Summary (AS1) and Statement of Attainment (SOA) for the Unit of Competency:
TLILIC2005 Licence to operate a boom-type elevating work platform (boom length 11 metres or more)
Licence Application (QLD)
Successful applicants will receive an Assessment Summary (AS1) from the accredited assessor and a Statement of Attainment from WH&S More Skills. Applicants need to complete the online application for a new Queensland HRW Licence on the Workplace Health and Safety QLD website. This must be done within 60 days of successfully completing the practical assessment. The application fee is $91.50 and payable at the time of your application.
Students should retain their AS1 and proof of payment as evidence that they can lawfully perform work in the relevant class of High Risk, pending a decision on your application. Upon lodgement, enquiries regarding your application should be directed to Workplace Health and Safety QLD on phone 1300 369 915.
Training Requirements & What To Bring
- High Risk Work Licence assessments can only be undertaken at the age of 18 years or over
- All current High Risk Work Licences
- Logbooks recording high risk work hours under supervision (if available)
- Unique Student Identifier (USI) is required prior to course commencement – please bring number to course.
- Photo ID i.e. Queensland or Interstate Driver’s Licence or Passport
- Applicants will be required to have a basic knowledge and understanding of the English language
- PPE must be worn by students attending the course on all occasions. This includes steel cap boots, long pants, long sleeves, (high vis shirt if possible otherwise long sleeves with a high vis vest) and a safety hard hat. For dogging, rigging & scaffolding courses, students are required to bring gloves and safety glasses.
WH&S More Skills will provide whistles as well as the general training equipment, notes, logbook and training plans, calculators and pens.
The training facilities are comfortable air conditioned with modern training aids. Tea and coffee making facilities are provided as well as fridges and a microwave for participants to use. There are several takeaway lunch spots of good quality within a kilometre. Lunch is not provided with the training.
Students have direct access to all the necessary plant required for the relevant course i.e. Cranes, EWP, Forklifts and Scaffold.
The Construction Training Centre offers a free car park for all students and visitors, as well as a cafe onsite.
On-site Training & Group Bookings
We also offer onsite training as well as group booking options at our training facilities.
Onsite training and group bookings provide the advantage of being able to choose the course dates as it is suitable for you and your employees.
For more information contact us on (07) 3183 0000 or send an email enquiry.